Cables Coaxial Cable Communication Cable RG59/U, RG6/U and RG11/U Coaxial Cable for Video Applications
Coaxial cable conducts electrical signal using an inner conductor (usually a solid copper, stranded copper or copper plated steel wire) surrounded by an insulating layer and all enclosed by a shield, typically one to four layers of woven metallic braid and metallic tape.
The advantage of coaxial design is that with differential mode, equal push-pull currents on the inner conductor, and inside of the outer conductor, the signal's electric and magnetic fields are restricted to the dielectric, with little leakage outside the shield.
Further, electric and magnetic fields outside the cable are largely kept from interfering with signals inside the cable, if unequal currents are filtered out at the receiving end of the line.
Common applications of coaxial cable include video and CATV distribution,
RF and microwave transmission, and computer and instrumentation data connections
The cable is protected by an outer insulating jacket. Normally, the outside of the shield is kept at ground potential and a signal carrying voltage is applied to the center conductor.
This property makes coaxial cable a good choice both for carrying weak signals, that cannot tolerate interference from the environment, and for stronger electrical signals, that must not be allowed to radiate or couple into adjacent structures or circuits. Larger diameter cables and cables with multiple shields have less leakage.
| Dimension: | ||||||
| Model | 521 | 621 | 721 | 821 | 921 | 942 |
| Item | RG59 | Rg58 | Rg6 | Rg7 | Rg11 | RG59+2C |
|
Material of inner conductor |
CCS | CCS | CCS | CCS | CCS | CCS |
|
Diameter of inner Conductor(mm) |
0.81±0.02 | 19*0.2±0.01 | 1.00±0.02 | 1.29±0.02 | 1.63±0.02 | 0.81 |
| Material of dielectric | Foam PE | Foam PE | Foam PE | Foam PE | Foam PE | Foam PE |
| Diameter of dielectric(mm) | 3.66±0.15 | 2.95 | 4.57±0.01 | 5.72 | 7.11 | 3.7 |
| Material of shield |
ALfoil+AI brading |
BC/TC brading |
ALfoil+AI brading |
ALfoil+AI brading |
ALfoil+AI brading |
ALfoil+AI brading |
|
Diameter of 1st outer conductor(mm) |
3.90 | 4.90 | 5.90 | 7.52 | 3.9 | |
|
Diameter of 2nd outer conductor(mm) |
4.12 | 5.00 | 7.80 | 4.3 | ||
| Material of Jacket | PVCPE | PVCPE | PVCPE | PVCPE | PVCPE | PVCPE |
| Diameter of Jacket | 6.30 | 4.95 | 6.90 | 8.10 | 10.16 | 11.5*6.00mm |
